Baiting Tools

Avid Retracta Tool Set The Retracta Tool Set comes complete with all 5 Retracta baiting tools in a super compact hard case. The embossed case makes it easy to identify where your individual tools are stored. Using a double rear hinge design with magnets, the Retracta Tool Storage Case can be stood upright for ease of use.

ESP Nut Drill 8mm The Nut Drill and matching diameter Cork Sticks are designed for drilling out tiger nuts and boilies to create a buoyant or wafter hookbait. The drills are made to our own specification using high-grade stainless steel. The drills have a sharp pilot point and leading edge, so clean holes can be drilled without the risk of splitting or damage, even in relatively soft or fragile ba…

ESP XL Baitstick Needle This Extra Long Bait Stick Needle is ideal for threading through tightly packed dynamite sticks or P.V.A bags. The 12cm long, flat forged needle is exceptionally rigid and the gate latch head clasps and closes round loops allowing you to pull the hooklink back through sticks or bags.

Fox 1.5mm Pellet Drill The FOX 1.5mm Nut Drill is perfect for drilling fine holes through the centre of any hard bait from trout pellets through to nuts, air dried boilies and floating pellets.

Fox 1mm Micro Drill Designed for drilling ultra fine holes into hookbaits. Allows you create a bore in a hard bait for your baiting needle. Perfect for hard baits such as nuts, air-dried boilies and corkball pop-ups. Ergonomically designed highly visual handle.

Fox Easy-Splice Needle Twisted stainless steel wire designed for splicing leadcore and lead-free leader materials as well as splicing Edges Camo-Splice hooklink material. Diamond shaped for ease of use.

Fox EDGES Bait Drill & Cork Sticks Ideal for balancing or popping up hookbaits. EDGES™

Fox EDGES™ Micro Needles - HEAVY NEEDLE The Heavy Needle is perfect for larger boilies and harder baits.

Fox EDGES™ Splicing Needle The Fox Splicing Needle is designed to neatly splice loops into leadcore or 30lb Submerge leaders. The needle features a micro engineered, hinged gate which closes to capture the fibres and prevents snagging during the splicing process. The needle shaft is constructed from ultra low diameter stainless steel and this makes the needle ideal for hair rigging small, soft bai…

Korda Bait Drill These precision engineered drill bits come in a choice of 1mm, 4mm, 6mm, or 8mm diameters, making them perfect for boring-out any hookbait and adding buoyancy to it, via the matching cork sticks, which are provided. These are best used with boilies or nut baits where you want to add some buoyancy, such as critically balancing a bait or creating a snowman set-up from your bottom ba…

Korda Basix Baiting Needle The Basix Baiting Needle can be used with most baits, as it is sharp and strong, meaning that it can be pushed through most harder baits without fear of splitting them. The ‘crook’ on the end has been designed to hold your hair in place whilst the bait is threaded onto it, off of the needle, but without danger of it fraying braided materials or causing them to separate,…

Korda Braided Hair Needle Part of our comprehensive range of baiting tools, the Braided Hair Needle is, as the name implies, for use with braided hook link materials, or any sort of braided hair material. It is sharp and strong enough that it can be pushed through any baits without splitting them, and the ‘crook’ design will allow a hair loop to be pulled through the bait without the needle gettin…

Korda Fine Latch Needle This 7cm long baiting needle is perfect for use with softer baits – including particles such as sweetcorn - and leaves as small a hole through them as possible due to its very slim profile. It features a latch to hold your hair in place – whatever type of hair material you are using – whilst it is pulled through the bait. It features a hi-viz purple handle to prevent loss,…

Korda Splicing Needle This needle is perfect for splicing loops into materials such as our Kable leadcore or DuraKord leader, thus making them very easy to attach and detach from your main line without the need to keep cutting them shorter. The Slicing Needle features a gated latch that closes sufficiently tightly that it will help to grip a tag end whilst it is being pulled through a splice to cr…

Korda Super Fine Braid Needle This baiting needle is designed for use with delicate baits that can easily be damaged or split by a wider diameter needle. The Super Fine Braid Needle is still very strong though and has a round profile, with a tapered point making it easy to push through harder baits such as tiger nuts and small pop-ups. It has a recessed barb to ensure that it will retain your hair…

Nash Bait Corer 5mm Essential for fine tuning hookbait buoyancy the Bait Corer removes a neat cylinder from boilies and nuts. Insert Hookbait Balancing Foam to create slow sinking presentations or instantly convert boilies to pop ups.

Nash Bait Corer 7mm Essential for fine tuning hookbait buoyancy the Bait Corer removes a neat cylinder from boilies and nuts. Insert Hookbait Balancing Foam to create slow sinking presentations or instantly convert boilies to pop ups. Available in 5mm and 7mm. Finished in Nash cyan blue and black.

Nash Boilie Needle Versatile 1.1mm diameter needle for easy mounting of all boilies and pop ups including double baits. Ergonomic soft touch handle and Nash cyan blue and black finish. 1.1mm diameter needle

Nash Micro Boilie Needle Reduced diameter 0.9mm needle for fragile baits such as corn or mini boilies. Ergonomic soft touch handle and Nash blue and black finish.

Nash Nut Drill Ergonomic soft touch handle and pink/black finish.

Nash Splicing Needle Micro latched low diameter splicing needle, essential for splicing your own Cling-On and Cling-On Leadcore Leaders. Ergonomic soft touch handle and Nash Purple and black finish.

Nash Stringer Needle Ideal for mounting multiple baits on PVA string or PVA sticks on to hooklinks Extra strong, low diameter 115mm latch key needle for mounting multiple baits on PVA string or PVA sticks on to hooklinks. Ergonomic soft touch handle and red/black finish.

Nash Stripper Tool Three stripper diameters of 0.2mm, 0.3mm and 0.5mm cater for all breaking strains of links. Finished in Nash cyan blue and black.

Nash The Shrinker The quickest and neatest way yet devised of finishing rigs with shrink tube kickers and extensions. Wet the entire rig, slide the hook and tube into the central bore of the Shrinker Tool and secure the link. With a jet lighter apply heat to the underside of the tube and in seconds it will have shrunk and can then be removed and shaped with ease. No more kettles and stoves or wait…